Novel codend technology promises improved quality, selectivity, and survivability

Background

New Zealand is pioneering novel codend technology, called the Modular Harvesting System (MHS), aiming to improve catch quality, selectivity, and survivability (discard & cryptic).

See here for a 3 min video overview: Introduction to Precision Seafood Harvesting

The MHS is approved for commercial use in New Zealand.

The approval process required the team to show that the novel codend technology performs “no worse than” traditional codends across a number of metrics (species composition, size composition, protected species impact, and benthic impact). This was achieved by designing a modular harvesting system (MHS) codend that basically mimicked the performance of traditional mesh codends. More information on the MHS and the approval process in New Zealand is provided below:

The first overseas trials of the MHS have been conducted successfully in the Netherlands flatfish beam trawl fishery

Opportunity

In addition to maximizing both catch quality and survival rates, the novel codend technology represents a unique opportunity to design species-selective fishing gear by exploring the natural escape behaviour in the reduced water flow environment within the MHS codend.

This blog post was started with the intention to:

  1. Share information & trial experiences.
  2. Provide a forum for discussions (comments, questions, feedback).
  3. Identify potential use cases outside of New Zealand.
  4. Identify & connect with potential partners for international trials.

We are inviting you to share your thoughts and ideas.

The Precision Seafood Harvesting Team

Maximum likely fishing depth in the NEAFC area

Dear ICES/FAO WGFTFB members

One of the objectives of our ICES/FAO working group is to provide ICES with expertise on fishing gear. Therefore, ICES contacts our working group on a regular basis to contribute this expertise for specific technical input that ACOM requires to draft advice upon request from various management organizations. This time, ICES is searching YOUR/our technical input on the following topic related to a review on the current and potential commercial deep sea (>1000m) fishing practices worldwide:

Terms of reference for WGFTFB (and WGSFD)

Working with WGFTFB/WGSFD, provide a commentary based on expert judgement as well as NEAFC VMS and catch report data analysis on maximum depth on the use of mobile bottom contacting gear (trawls) and bottom contacting static gear in the NEAFC regulatory area.

Scientific justifications

In the context of setting up OECMs, NEAFC will require information on areas that may be fished in the future. As such, an analysis of current NEAFC fishing practices in terms of maximum depth and in terms of general bathymetric features is required to inform the likely future extent by the depth of fishing. This commentary by WGFTFB/WGSFD will serve as input to an ICES workshop on 7-11 August that will also look at the long-term biodiversity/ ecosystem benefits of 1) areas restricted to bottom fishing, and 2) closed areas according to the VME Recommendation (19:2014).

Note: WGSFD are analysing NEAFC VMS and catch report data and will also input towards the general commentary.

Background/deliverable

NEAFC (Northeast Atlantic Fisheries Commission) will require information on areas that are at suitable depths for fishing and on areas that could in the future also be suitable. This information is required by NEAFC in the process of designating areas as OECMs (“Other effective area-based conservation measures”) that have strict criteria. The criteria state that the management measures (i.e. restrict bottom fishing activity) are realistic and that by putting this in place it will have a long-term to biodiversity.

As such, an analysis of current NEAFC fishing practices in terms of maximum depth and in terms of general bathymetric features is required to inform the likely future extent by depth of fishing. This commentary by WGFTFB/WGSFD will serve as input to an ICES workshop, 7-11 August 2023, that will also look at the long-term biodiversity/ ecosystem benefits of 1) areas restricted to bottom fishing, and 2) closed areas according to the VME Recommendation (19:2014). The workshop will 1) evaluation of the biodiversity attributes of the areas concerned, 2) list potential threats resulting from pressures, and specifically evaluate the pressures and likely threats from fishing activities affecting or expected to affect the areas and the biodiversity attributes, and 3) evaluation of the NEAFC management measures as to whether they achieve, or are expected to achieve, positive and sustained outcomes for the in situ conservation of biodiversity. This should also include the likely or potential effectiveness in mitigating the threats to the biodiversity attributes.

Additional ToR for WGFTFB/ WGSFD

Working with WGFTFB/WGSFD, provide a commentary based on expert judgement (WGFTFB) as well as NEAFC VMS and catch report data analysis (WGSFD) on current and potential maximum depth on the use of mobile bottom contacting gear (trawls) and bottom contacting static gear (e.g. longlines) in the NEAFC regulatory area.

=====

Task of WGFTFB

As the focus of this advice is “what might be future depth limits of deep sea fishing” in the North East Atlantic region (https://en.wikipedia.org/wiki/North_East_Atlantic_Fisheries_Commission ), the question is directed to all WGFTFB members  to provide expertise / knowledge on deep sea fishing (>1000m) worldwide to include expertise and current and past practise from around the globe.

Please provide your technical input (in a review type of format) on the below questions:

  1. Current and past deep-sea fishing: Do you have any knowledge about deep sea fishing (>1000) in any area of the world. Please, provide details if possible (areas, depth range, type of fishery, target species, countries involved, when this fishery was conducted).
  2. Future deep-sea fishing: Do you see a further expansion of deep-sea fishing in the future (e.g. do you see any technical reason not to fish there)? What is your expectation?
  3. Do you know/have literature about deep sea fishing (>1000m)?

We require your input no later than by Friday the 21 July, so that it can be compiled into a coherent commentary.

A critical element in the ICES advisory service quality programme is the review of analysis provided by the expert groups. The review is required to assure a sound scientific basis for the advice. ICES depends on the willingness of experts that have not been involved with the work in the expert groups to provide such reviews. The task is absolute vital to assure that ICES advice remains based on best science.

Look forward to hearing back from you.

Best regards

The ICES/FAO WGFTFB chairs

Legitimate Conferences for Fisheries

Hello everyone!

I would like to know about any conferences for 2023/2024 that are about fisheries or one of the themes is fisheries that are legitimate as there are more and more conferences that are predatory.

I want to make sure that what I am signing up for isn’t essentially a scam or a conference made up simply to make money.

I would also appreciate any websites that usually post legitimate conferences/workshops.

Thank you all!

Monika J. Szynaka

Challenges to incentivizing avoidance of unwanted catch

The cartoon graphically and effectively illustrates and promotes the recently completed Themed Set in the ICES Journal of Marine Science on Challenges to incentivizing avoidance of unwanted catch. The cartoon, alongside a pretty good summary of the findings, also appears at the ICES website.

The 18 open-access articles in the Set (plus an Introduction) cover three major topics including a range of human behavioural models to understand motivations and incentives in use of selective gears by fishers and others, challenges to cooperative spatio-temporal avoidance of bycatch, and other relevant technical or other measures to reduce bycatch.

The set includes possibly the last publication by Sarah Kraak. Credit is due to her for initiating the Themed Set and acting as its major driving force before her tragic death in early 2022. To those of you who knew her, I hope you find that she is appropriately acknowledged and recognized in the Set.

My involvement in these questions of uptake of proven fishing gears grew out of a Topic Group at WGFTFB, Steve Eayrs having overcome my resistance to participating. That’s a pretty strong example of the relevance and impact of WGFTFB’s activities and of the value of our collective experience and wisdom.

I hope you find the Set useful. There is still a lot to be learned on the subject!

Mike Pol, Ph.D

DEMaT 2022 proceedings

Proceedings of the 15th international DEMaT workshop (12-15 September 2022) hosted by the University of Rostock in Germany (Download)

 

Bottom longline impact

Bottom longline impact

I am searching for any material describing or evaluating the bottom impact of bottom longlining or any other environmental impact generated from bottom longlining. I have seen that longlines tend to generate more ALDFG than other gears.

  1. Does anyone have results showing the same or different?
  2. How about references about directly impacting some specific bottom fauna, like long-living coral?
  3. We know set longlines (on the bottom) have a lesser impact than most other fishing gears. Can we quantify? Do we have research studies?

I would appreciate it if anyone could provide relevant references or grey literature.

Haraldur Arnar Einarsson

First Call for abstracts to ICES/FAO WGFTFB23

The International ICES/FAO WG on Fishing Technology and Fish Behaviour (WGFTFB) taking place 13-17 February 2023 (Kochi, India) will be the first physical meeting since 2019, and as such will be an important event for relaunching the groups primary function of exchanging important research findings, innovations and building of dynamic new networks and collaborations.

Call for Abstract(s)

Oral and poster presentations are the main mechanism for the exchange of information.  This mail serves as a first call for abstract submissions. We invite proposals for two types of presentations:
1. Oral Presentations (formal presentations and slides) (*)
2. Poster Presentations

(*) if time slots for presentations are limited, some abstracts for oral presentation may be accepted for poster presentation.

Topic Areas.

There is no limitation to the topic of your abstract – apart from relevance for WGFTFB. Topics could include for example:

– research related to fishing gears

– modelling approaches

– implementation and implications for fisheries management

– behaviour of animals related to the catch process

– new ideas and projects

– technical solutions to help investigations

– technical issues that need addressing

Proposal Submission

Interested presenters should submit an abstract using the form: https://wgftfb.org/annual-meeting/abstract-submission/, summarising the proposed presentation and indicating to which (if any) Topic Group the abstract relates to. Submissions will be judged on relevance to the working group themes, clarity of thought, data/documented results, fit within the meeting program and other criteria.

NOTE: The deadline for abstract submission is 12th December 2022.

Meeting Registration

All presenters are required to register online at: https://wgftfb.org/annual-meeting/registration/.

Registration is free of charge for WGFTFB members (Regular and Chair-invited members).

For more details on online registration, abstract submission, accommodation, flight, and venue, please visit our website https://wgftfb.org/annual-meeting/.

Important dates
12th December 2022. Deadline for Abstract Submission
12th January 2023. Notification of Acceptance

13th January 2023: Meeting registration deadline

6th February 2023. Deadline for National Report Submission
13-17 February 2023. WGFTFB23 Meeting Dates.

We look forward to see you at the WGFTFB23 meeting.
Antonello, Daniel, and Jon (WGFTFB Chairs)

 

 

 

Underwater footages in bottom trawling

Underwater footages in bottom trawling

I am involved in a project focused on understanding, through underwater footage in bottom trawling, the efficacy of selection grids and gaining basic information on the behaviour of fish/shrimps towards them. Hauls will be performed at depths ranging from 100 to 200 m.

In my institute, we have always worked with GoPros and deepwater housings associated with lights (see the images attached), but sometimes, especially in dark and/or high turbidity environment, the footages are not usable.

Do you have any alternative or advice on the best solution to obtain useful footages during trawl hauls to monitor escapees from selection devices and some behaviour information?

We use these devices on commercial vessels, so we need easy-handling equipment.

Andrea Petetta, CNR IRBIM

Potential producer for MiniSeine system

Potential producer for MiniSeine system

Several of you know about the work on the MiniSeine as potential alternative gear for some gillnet fisheries in areas with high seal depredation rates on gillnets like the Baltic Sea.

Some work on the gear is ongoing in Sweden (SLU), some work has been done in Denmark (DTU), and the first trials in German waters (Thünen; https://www.thuenen.de/en/institutes/baltic-sea-fisheries/projects/fisheries-and-survey-technology/miniseine-eine-kleine-snurrewade-fuer-die-deutsche-kuestenfischerei) finished some weeks ago.

Although the catches in the German trials were rather promising, several major issues with the gear (e.g., slow retrieval speed due to weak drum engines) could be identified. Therefore, we are considering/planning to procure a more professional system and would like to make use of our “swarm intelligence” to find out if anyone can recommend any company being able to provide us with such gear.

Besides Kynde & Toft in Denmark (https://kyndeogtoft.dk/), whose service catalogue covers mainly larger systems, I am in touch with Lorentzen Hydraulikk in Norway (https://lormek.no/), who offer more or less exactly what we need: https://lormek.no/products/kombinasjonsvinsjer-18-tonn/.

Anyway, I would like to know if you have experience, suggestions, or ideas for other companies that could produce or even offer such gear.

Thomas Noack

Fisheries and Survey Technology

Thünen Institue of Baltic Sea Fisheries, Rostock (Germany)

Offshore wind installations for electrical generation

Offshore wind installations for electrical generation

More and more countries are developing offshore wind installations for electrical generation. Some already have installed large numbers of turbines. The existing and proposed installations often overlap with existing commercial fisheries. In some regions, the fishing industry has expressed concern that fishing will be completely displaced due to several concerns, primarily involving safety and mobile gears. The installations will also interfere with the monitoring of fish resources by impairing trawl-based resource surveys.

Mike Pol is interested in a closer examination of several topics related to the accessibility of wind farms for commercial fishing and for surveys. His interest was spurred because he was asked to create scaled drawings of mobile gears within a wind farm (see an example in Figure 1), and he was surprised at the relative size of the gear, as well as a lack of relevant literature.

He thinks would be interesting to:

  • Investigate potential for the safe operation of otter trawls within a wind farm based on improved knowledge and modelling of movement and behaviour of doors, nets, and cables.
  • Investigate potential adjustments to design parameters of wind installations (particularly floating turbines) to improve accessibility to fishing
  • Investigate current adaptations by commercial fleets and stock surveys to installed wind farms
  • Understand the potential for the development of alternative exploitation methods
  • Understand the potential for the development of alternative survey approaches.

At an informal discussion after the Annual Meeting of WGFTFB recently, Mike Pol was pleasantly surprised to find several of the WG members are similarly interested. It was suggested a blog post on the WGFTFB website would be a good way to inspire a discussion that could lead to a topic group or similar effort.

He would be interested in any and all feedback.

Figure 1. A scale model drawing of an 87 ft vessel towing an otter trawl within the footprint of a 1 nm x 1 nm wind farm.